Product overview

DS2400N-0200 SHORT RANGE, LINEAR, NSC

Features

• Increased read rate on low contrast and dirty bar codes
• Embedded ID-NET™ high speed connectivity to simplify data collection and cluster wiring
• Intuitive X-PRESS™ interface for quick scanner installation and troubleshooting
• Easy setup through multi-language Genius™ SW tool
• ACB™ advanced code builder technology improves the read rate on damaged bar codes
• Motor on/off and motor speed SW programmable for higher reliability
• IP65 rugged industrial housing

Applications

• Automated warehousing
  • Conveyor sorting
  • Picking systems
• Automated shopfloor
  • Items and parts tracking
  • Process control
  • Packaging and compliance
• OEM
  • Document Handling
  • Print & Apply
  • Automatic chemical and biomedical analysis machines

General Description

The New DS2400N laser reader takes advantage of Datalogic's successful experience in 1D bar code reading, satisfying the demanding application needs of the largest manufacturers worldwide. DS2400N provides greater profitability and productivity in the most common warehousing, shop floor and OEM applications.
Enhanced Reading Performance
The DS2400N grants high reliability when reading difficult bar codes thanks to its capability of self-optimizing reading performance in any condition and using ACB™ reconstruction technology. DS2400N offers an extremely wide depth of field and large reading area in a very compact and robust housing with IP65 protection.
New Embedded ID-NET™ High Speed Interface
The DS2400N is equipped with the built-in ID-NET™ interface, used for high-speed scanner interconnection. ID-NET™ allows faster and more efficient data collection without the need for an external multiplexer device. This translates into overall cost reduction and easier system wiring.
Innovative X-PRESS™ Human Machine Interface
X-PRESS™ is the intuitive Human Machine Interface designed with the precise goal of improving ease of installation and maintenance. Status and diagnostic information are clearly presented by means of a five LED bar-graph, whereas the single multi-function key gives immediate access to relevant functions such as Test Mode (for bar code verification), AutoLearn (for bar code self-detection) and AutoSetup (for scanner self-adjusting). This makes working easier for any user.
Multi-language Genius™ SW Configuration Tool
The DS2400N scanner can be easily programmed through the intuitive and multi-language Genius™ SW tool. Thanks to the wizard approach and graphic add-ons, the scanner configuration will be accomplished rapidly.

Specification

ELECTRICAL CHARACTERISTICS
Power Supply: 10 to 30 VDC
Power Consumption: 5 W
ENVIRONMENT
Storage Temp.: -20 to 70 °C (-4 to 158 °F)
Vibration Resistance: IEC 68-2-6 test FC 1.5 mm; 10 to 55 Hz; 2 hours on each axis
Protection Class: IP65
Operating Temp.: 0 to 45 °C (32 to 113 °F)
Shock Resistance: IEC 68-2-27 test EA 30 G; 11 ms; 3 shocks on each axis
Humidity: 90% non condensing
MECHANICAL CHARACTERISTICS
Dimensions: 84 x 68 x 34 mm (3.31 x 2.68 x 1.34 in)
Weight: 330 g (11.6 oz)
Case Material: Aluminum
PERFORMANCE
Raster Aperture: 24 mm (0.95 in) at 500 mm (20 in)
Device Programming: Genius™ SW configuration tool
X-PRESS™ human machine interface
Serial host mode programming sequences
Input Signal: External Trigger (optocoupled, NPN/PNP), IN1 (optocoupled, NPN only)
Max. Depth Of Field: Up to 400 mm (15.7 in) on 0.50 mm (20 mils) bar codes
Motor Control: Motor ON/OFF command string and motor speed SW programmable
Light Source: Visible laser diode (630 to 680 nm)
Laser Classification: IEC 825-1 Class 2; CDRH Class II
Multilabel Reading: Up to 10 different symbologies during the same reading phase
Max. Resolution: Up to 0.20 mm (8 mils)
Scanning Speed: 600 to 1000 scans/sec (SW programmable)
Max. Reading Distance: Up to 600 mm (23.6 in) on 0.50 mm (20 mils) bar codes
Aperture Angle: 50 degrees
Readable Codes: Code 2/5, Code 39, Code 93, Code 128, EAN/UPC, EAN 128, Codabar, Pharmacode, ISBN128
Comm. Interfaces: Main port RS232/RS485 SW selectable up to 115.2 kbps
Aux. port RS232 up to 115.2 kbps
ID-NET™ port up to 1 Mbps
Operating Modes: ‘On line’, ‘Serial On-line’, ‘Automatic’, ‘Continuous’, ‘Test’, ‘Verifier’
Output Signals: OUT1, OUT2 SW programmable event driven (optocoupled, NPN/PNP)
Laser Control: Security system to turn laser off in case of motor slow down or failure