81 items

Sick FFUS10-1G1IO (6041737)

Picture of Sick FFUS10-1G1IO

This image is supplied for illustrative purposes only.
Please check for product inclusions and exclusions.

Product Summary
Manufacturer: Sick
Manufacturer part number: 6041737
Product Condition: New
Weight (kg): 1.00
VS ID: 185915
Availability: Please check
Our price: €542.01
(Ex VAT @ 20%)
List price: €570.54
You save: 5.0%
Change currency

Sick FFUS10-1G1IO (6041737) Overview


Sick FFUS10-1G1IO (6041737) Description

  • Flow sensor for conductive and non-conductive liquids
  • Compact design with no moving parts
  • Process temperature up to 80 °C, process pressure up to 16 bar
  • High chemical resistance due to seal-free sensor design
  • Large display with membrane keyboard
  • Integrated teaching tube detection
  • Your benefits

  • Reduced maintenance costs
  • Adjustable measuring ranges reduces the number of variants
  • Ability to be used with conductive and non-conductive liquids reduces variants and lowers storage costs
  • Straight measuring tube reduces pressure loss, thus reducing energy costs
  • Sensor without seals increases process reliability and availability
  • Flexible measurement system for all industries

Nominal width measuring tube:NW 10
Process temperature:0 °C ... 80 °C
Process pressure:Max. 16 bar
Minimim flow:0.3 l/min
Maximum flow:21 l/min
Inlet zone:20 cm
Outlet zone:0 cm
Conductivity:No limitation
Accuracy of sensor element:2 % (of final value. Optional 1% of reading +/- 3 mm/s (with calibration report)) 1)
Repeatability:≤ 0.5 %
Resolution:0.003 l/min
1) Reference condition: water, gas-free, fully-filled measuring tube, no cavitation, Medium temperature 20 °C, ambient temperature 20 °C ... 25 °C, compliance with the inlet zone and outlet zone, warm-up time electronic: 30 min  
Mechanical data
Process connection:G 1/2
Wetted parts:PSU
Housing material:PSU
Weight:340 g
Enclosure rating:IP 67
Electrical data
Supply voltage:18 V DC ... 30 V DC 1)
Ripple:≤ 5 Vpp 2)
Power consumption:≤ 180 mA 3)
Initialization time:≤ 5 s
Protection class:III
Connection type:M12x1, 5-pin
Output signal:Analog output: 4 mA ... 20 mA, 0 mA ... 20 mA current flow and temperature
1 pulse/status output: PNP-transistor output for flow rate meter, empty pipe detection, flow monitoring, dosing output, flow direction (depending on type)
Impuls/frequency output:0 kHz ... 10 kHz
Puls width:≤ 1 s
Signal voltage HIGH:Vs - 2 V
Signal voltage LOW:≤ 2 V
Output current:< 100 mA 5)
Inductive load:1 H
Capacitive load:100 nF
Response time:Filter off 100 ms, filter low 300 ms, filter medium 1 s, filter strong 4.2 s 6)
Output load:< 500 Ohm
Lower signal level:3.8 mA ... 4 mA
Upper signal level:20 mA ... 20.5 mA
1) 4) All connections are polarity protected. All outputs are overload and short-circuit protected.  2) May not exceed or fall short of VS tolerances  3) Without load  5) There are 100 mA for each output pnp and npn available.  6) Analog output and display  
Ambient data
Ambient operating temperature:0 °C ... 60 °C
Ambient storage temperature:-20 °C ... 70 °C

Related products

Products specifications

Manufacturer categorySick FFU
Recently viewed products
Sick FFUS10-1G1IO
Special Offer